DLI/DILOGDLI/DILOG Home
DLI/DILOGCompany InfoProductsContact UsEuropean Site
DLI/DILOG
XFR Family
XFR Family
The Dilog 2XFR is a high performance Ultra SCSI controller designed so that when connected to two, four, six or eight SCSI hard drives, the sustained data transfer rate is doubled and the capacity is the sum of the individual disks. The controller is designed to appear and play as a standard SCSI disk drive thereby simplifying installation.

The Dilog 2XFR+ is a fourth generation high performance Ultra SCSI RAID controller designed for either striping (RAID 0) or mirroring (RAID 1). When connected to two, four, six or eight SCSI hard drives in striping mode, the sustained data transfer rate is doubled and the capacity is the sum of the individual disks. In the mirroring mode, the mirrored drive set is an exact duplicate of the master set such that if 1 drive fails, the system continues to operate at full performance levels.

The 3XFR is a fourth generation high performance Ultra SCSI RAID controller designed with the user in mind. Unlike traditional RAID controllers, there is no performance compromise made in order to be everything to everybody. The 3XFR does one of three RAID functions (0,1, or 3) and does it better than any compromise controller on the market. And its technology will stay "the newest". With all its functions stored in flash RAM, the 3XFR can have its operational characteristics changed or be updated to the latest revision on site through its own serial port.

2XFR Home
2XFR+ Home
3XFR Home
Copyright 1998 DLI/DILOG
2651 Dow, Tustin, CA 92780
Tel: 714-508-1040 -- Fax: 714-508-1050
E-mail: info@dilog.com

Web Site Designed By E-Net Information Services